arcconf GETCONFIG 1 LD

<code>
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
   Logical device name                      : 00
   RAID level                               : 10
   Status of logical device                 : Optimal
   Size                                     : 571382 MB
   Stripe-unit size                         : 256 KB
   Read-cache mode                          : Enabled
   MaxIQ preferred cache setting            : Enabled
   MaxIQ cache setting                      : Disabled
   Write-cache mode                         : Enabled (write-back)
   Write-cache setting                      : Enabled (write-back)
   Partitioned                              : Yes
   Protected by Hot-Spare                   : No
   Bootable                                 : Yes
   Failed stripes                           : Yes <---------------------------------------
   Power settings                           : Disabled
   --------------------------------------------------------
   Logical device segment information
   --------------------------------------------------------
   Group 0, Segment 0                       : Present (0,0)             JTVM5BSL
   Group 0, Segment 1                       : Present (0,1)             JTVKP0GL
   Group 1, Segment 0                       : Present (0,3)             J0VW0P3M
   Group 1, Segment 1                       : Present (0,2)             J0VW0NTM
</code>

<code>arcconf task start <controller_num> logicaldrive 0 verify_fix
</code>