====== ssacli ======

Примеры использования HP Enterprise **ssacli **

Ссылка на **ssacli** [[https://downloads.linux.hpe.com/SDR/project/mcp/|https://downloads.linux.hpe.com/SDR/project/mcp/]]

==== Show configuration ====

<code>
ssacli ctrl all show config
</code>

==== Controller status ====

<code>
ssacli ctrl all show status
</code>

==== Show detailed controller information for all controllers ====

<code>
ssacli ctrl all show detail
</code>

==== Show detailed controller information for controller in slot 0 ====

<code>
ssacli ctrl slot=0 show detail
</code>

==== Rescan for New Devices ====

<code>
ssacli rescan
</code>

==== Physical disk status ====

<code>
ssacli ctrl slot=0 pd all show status
</code>

==== Show detailed physical disk information ====

<code>
ssacli ctrl slot=0 pd all show detail
</code>

==== Logical disk status ====

<code>
ssacli ctrl slot=0 ld all show status
</code>

==== View Detailed Logical Drive Status ====

<code>
ssacli ctrl slot=0 ld 2 show
</code>

==== Create New RAID 0 Logical Drive ====

<code>
ssacli ctrl slot=0 create type=ld drives=1I:1:2 raid=0
</code>

==== Create New RAID 1 Logical Drive ====

<code>
ssacli ctrl slot=0 create type=ld drives=1I:1:1,1I:1:2 raid=1
</code>

==== Create New RAID 5 Logical Drive ====

<code>
ssacli ctrl slot=0 create type=ld drives=1I:1:1,1I:1:2,2I:1:6,2I:1:7,2I:1:8 raid=5
</code>

==== Delete Logical Drive ====

<code>
ssacli ctrl slot=0 ld 2 delete
</code>

==== Add New Physical Drive to Logical Volume ====

<code>
ssacli ctrl slot=0 ld 2 add drives=2I:1:6,2I:1:7
</code>

==== Add Spare Disks ====

<code>
ssacli ctrl slot=0 array all add spares=2I:1:6,2I:1:7
</code>

==== Enable Drive Write Cache ====

<code>
ssacli ctrl slot=0 modify dwc=enable
</code>

==== Disable Drive Write Cache ====

<code>
ssacli ctrl slot=0 modify dwc=disable
</code>

==== Erase Physical Drive ====

<code>
ssacli ctrl slot=0 pd 2I:1:6 modify erase
</code>

==== Turn on Blink Physical Disk LED ====

<code>
ssacli ctrl slot=0 ld 2 modify led=on
</code>

==== Turn off Blink Physical Disk LED ====

<code>
ssacli ctrl slot=0 ld 2 modify led=off
</code>

==== Modify smart array cache read and write ratio (cacheratio=readratio/writeratio) ====

<code>
ssacli ctrl slot=0 modify cacheratio=100/0
</code>

==== Enable smart array write cache when no battery is present (No-Battery Write Cache option) ====

<code>
ssacli ctrl slot=0 modify nbwc=enable
</code>

==== Disable smart array cache for certain Logical Volume ====

<code>
ssacli ctrl slot=0 logicaldrive 1 modify arrayaccelerator=disable
</code>

==== Enable smart array cache for certain Logical Volume ====

<code>
ssacli ctrl slot=0 logicaldrive 1 modify arrayaccelerator=enable
</code>

==== Enable SSD Smart Path ====

<code>
ssacli ctrl slot=0 array a modify ssdsmartpath=enable
</code>

==== Disable SSD Smart Path ====

<code>
ssacli ctrl slot=0 array a modify ssdsmartpath=disable
</code>